Differences

This shows you the differences between two versions of the page.

--- workshops:nvidia_jetson:xavier_nx:x2go [2021/02/25 02:52] – created harley01
+++ workshops:nvidia_jetson:xavier_nx:x2go [2021/02/25 03:21] (current) – harley01
@@ Line 1: / Line 1: @@
 ====== X2Go Configuration ======
+X2Go is an open source remote desktop software for Linux that uses a modified NX 3 protocol. X2Go gives remote access to a Linux system's graphical user interface.
+===== Hardware Setup =====
+{{:workshops:nvidia_jetson:xavier_nx:setup_remote_desktop.jpg?nolink&600|(Insert image here)
+}}
+Be sure to connect the following peripherals:
+  * Mouse
+  * Keyboard
+  * Screen (using an HDMI cable)
+  * Power Plug (of course)
+Turn on the Jetson Xavier NX by pressing the **POWER** button.
+Depending on the configuration at the time of installing the operating system, a login screen will appear, or it will automatically log in and skip this.
+Once the operating system is ready open the terminal by pressing the key combination **''Ctrl + Alt + T''**, or use the applications menu and search for //Terminal//.
+===== Installing X2Go =====
+Make sure all packages are up to date by running the command.
+<code>sudo apt-get update</code>
+Install X2Go by running.
+<code>sudo apt install x2goserver</code>
+You need the IP address of the system to know it, type in the terminal.
+<code>ifconfig</code>
+If you will use the remote connection via wifi look for the **wlan0** section and the sequence of numbers after the text **inet**, for example **inet 192.168.56.98**. In case of using it by ethernet look for the **eth0** section, or by usb **usb0**.
+This **IP address** and the previously configured **password** will be the necessary data to perform the remote connection.
+===== Remote Connection =====
+On the remote computer it is necessary to install an X2Go client, for that download the appropriate one for your operating system from this [[https://wiki.x2go.org/doku.php/doc:installation:x2goclient|link]].
+After downloading and installing the client, search in your applications for the program called **X2Go Client** and open it.
+{{:workshops:nvidia_jetson:xavier_nx:x2go_01.jpg?nolink&600|}}
+At the top left click on the icon to create a new session, and fill in the box with the necessary information, such as the IP of the Jetson board, a name to identify the session, the user name of the Jetson (in this case ''xavier'') and select the LXDE desktop environment, then click OK.
+{{:workshops:nvidia_jetson:xavier_nx:x2go_02.jpg?nolink&800|}}
+In the right pane select the session you have just created.
+{{:workshops:nvidia_jetson:xavier_nx:x2go_03.jpg?nolink&600|}}
+Insert the user password of the Jetson board and press Ok.
+{{:workshops:nvidia_jetson:xavier_nx:x2go_04.jpg?nolink&600|}}
+Finally you will get a window with the LXDE graphical environment.
+{{:workshops:nvidia_jetson:xavier_nx:x2go_05.jpg?nolink&600|}}
+Ready! now we can call graphical windows using X2Go.
+> **IMPORTANT NOTE: Make sure that the Jetson and the remote computer are connected to the same network, otherwise it will not work.**