Teaching WIKI
- teawiki.net -

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~

====== Accelerometer and Gyroscope: MPU-6050 by InvenSense/TDK ======

{{ :supp:sensors:mpu6050.png?direct&400 |}}

Figure 1: by ElectroniCats, git hub

===== 1. Introduction=====

The **MPU-6050** is a **6-axis** MEMS (Micro-Electro-Mechanical Systems) sensor that integrates a **3-axis accelerometer** and a **3-axis gyroscope** into a single compact package. This combination allows for comprehensive motion tracking and orientation detection, making it a popular choice in various applications, from robotics to wearable devices.

===== 2. Internal Working Principles =====

{{ :supp:sensors:mpu6050_diagram.png?direct&600 |}}

Figure 2: The MPU6050 Explained, available in: https://mjwhite8119.github.io/Robots/mpu6050

The **MPU-6050** operates based on the principles of MEMS technology, utilizing microscopic mechanical structures to sense motion.

**Accelerometer:**
  * **Capacitive Sensing:** Detects linear acceleration by measuring changes in capacitance caused by the displacement of a micro-machined proof mass within the sensor.
  * **Axes Measurement:** Provides acceleration data along the X, Y, and Z axes, enabling detection of movement and orientation changes.

**Gyroscope:**
  * **Coriolis Effect:** Measures angular velocity by detecting the Coriolis force acting on vibrating elements within the sensor as it rotates.
  * **Axes Measurement:** Captures rotational movement around the X, Y, and Z axes, essential for understanding orientation and rotational dynamics.

**Digital Motion Processor (DMP):**
  * **Sensor Fusion:** Integrates data from the accelerometer and gyroscope to provide more accurate motion tracking.
  * **Offloading Computation:** Processes complex calculations internally, reducing the computational load on the host microcontroller.

===== 3. Output Data =====

The **MPU-6050** communicates via the **I2C** protocol, providing:

1. **Accelerometer Data:** Raw acceleration values for X, Y, and Z axes.

2. **Gyroscope Data:** Raw angular velocity values for X, Y, and Z axes.

3. **Temperature Data:** Internal temperature readings, useful for calibration and compensation.

The sensor's output is typically in raw digital values, which require scaling and conversion to physical units (e.g., g for acceleration, °/s for angular velocity).

===== 4. Applications =====

The versatility of the **MPU-6050** makes it suitable for a wide range of applications:

  * **Robotics:** Enables balance control, navigation, and motion tracking.
  * **Drones and UAVs:** Assists in flight stabilization and orientation control.
  * **Wearable Devices:** Facilitates activity monitoring and gesture recognition.
  * **Gaming Controllers:** Enhances user interaction through motion sensing.
  * **Virtual Reality (VR):** Provides head tracking for immersive experiences.

===== 5. Interfacing with Microcontrollers =====

The **MPU-6050** can be interfaced with microcontrollers like the **ESP32-S3** using the I2C protocol. Here's a brief overview:

**Wiring:**
  * **VCC:** Connect to 3.3V (ensure voltage compatibility).
  * **GND:** Connect to ground.
  * **SDA:** Connect to the microcontroller's I2C data line.
  * **SCL:** Connect to the microcontroller's I2C clock line.

**Programming:**
  * Utilize libraries such as ``Wire.h`` for I2C communication and ``MPU6050.h`` for sensor interaction.

  * Initialize the sensor and configure settings like sensitivity and filter bandwidth.

  * Read and process data from the accelerometer and gyroscope registers.

**Note:** While the **ESP32-S3** operates at 3.3V logic levels, ensure that the **MPU-6050** module used is compatible with 3.3V to prevent damage.

===== 6. Examples =====

*This section is reserved for practical examples and code snippets demonstrating the use of the **MPU-6050** with various microcontrollers and applications.*

===== 7. Troubleshooting and Optimization =====

To ensure accurate and reliable data from the **MPU-6050**, consider the following:

**Calibration:**
  * Perform initial calibration to correct for sensor biases and offsets.
  * Utilize available libraries or write custom routines to determine and apply calibration values.

**Filtering:**
  * Implement filters (e.g., complementary or Kalman filters) to reduce noise and improve data stability.
  * Adjust filter parameters based on the specific application's dynamics and requirements.

**Power Supply:**
  * Ensure a stable and clean power supply to minimize voltage fluctuations that can affect sensor performance.

**Physical Placement:**
  * Mount the sensor securely to prevent vibrations and mechanical noise.
  * Isolate the sensor from sources of electromagnetic interference.

**Temperature Compensation:**
  * Account for temperature-induced variations by monitoring the internal temperature sensor and applying compensation algorithms if necessary.

===== 8. Resources and Diagrams =====

For detailed diagrams and further information, consider the following resources:

- **Official Datasheet:** MPU-6050 Datashee     https://invensense.tdk.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf

- __**LastMinuteEngineers** Clear explanation and examples__     https://lastminuteengineers.com/mpu6050-accel-gyro-arduino-tutorial/

- **Arduino Playground:** MPU-6050 on Arduino Playground     https://playground.arduino.cc/Main/MPU-6050/

- **DroneBot Workshop Tutorial:** Building an Electronic Level Meter     https://dronebotworkshop.com/mpu-6050-level/

- **Michael Schoeffler's Tutorial:** Using GY-521 Module with Arduino Uno     https://mschoeffler.com/2017/10/05/tutorial-how-to-use-the-gy-521-module-mpu-6050-breakout-board-with-the-arduino-uno/   {{youtube>XCyRXMvVSCw?medium}}